Corn Silage Harvest

Sep 01, 2025


Chopping Corn

Maximize Feed Quality

By the time you are reading this, south central Wisconsin will be just over 45 days since vegetative growth stage (VT), otherwise known as tassel. Although many factors are taken into place, 42 to 47 days post tassel is a signal that the plant is ready to be harvested for corn silage. With how busy and chaotic this season may be, it is important to remember the basics to maximize your feed quality for the upcoming year.

1. Moisture
This is the key variable to maintain control of when harvesting corn silage to take full advantage of quality and digestibility. Begin checking all corn silage fields and when the milk line has reached 20%, start to check whole plant moisture. Remember, the milk line at 20% is when the line is just starting to move from the top of the kernel to the tip. Note each field as they are assessed and once the wetter fields have been identified, a harvest plan can be determined. Harvest moisture is dependent on the storage unit, but typically a start benchmark of 70% moisture for bunkers and piles is safe. Ending with plant moisture above 63% is ideal for fermentation and NDFd. 

2. Chop Length
The ideal length may be determined by many factors including desire of overall total mixed ration length, plant moisture, and kernel processing abilities. For a standard self-propelled chopper with a processor, the recommended length is 3/4”-7/8”. For an operator that does not have a processor, and it is not an option to hire it done, shoot for 3/8” and put up the silage as wet as your silo will tolerate. If the corn plant is drier than desired (more than 2/3 milk line), consider raising your cutter bar height. Ideally, harvesting at the correct height would avoid this as rough estimates say each foot left in the field is about 1 pound of dry matter.

3. Processing
To amplify starch usage in the digestive tract, kernels must be processed. The type of starch (starchy/pasty versus dry/floury) and moisture of the plant should be noted when setting roll gaps. Typically, 1.5 mm (this recommendation varies depending on chopper units) does the trick. If you have a dry and floury starch or maybe a drier plant, consider going tighter. A quick trick to double-check your processing quality is to fill a 32 ounce container with your harvested silage. Assess quality by counting how many whole kernels there are. Also note any harder kernel pieces that are more than half the size of a kernel. There should be none of either.

4. Packing & Storage
Last but not least, when packing piles, a good rule of thumb is the rule of 800. For maximum packing density, aim for 800 pounds of tractor for every ton of silage delivered each hour. Always remember to cover your piles as soon as possible after the pile has been packed. Consider applying a buchneri inoculant during the harvesting phase to kickstart fermentation once properly ensiled in your bunker, bag, silo, etc.

If you have questions, concerns or just want a hands-on assessment of any of the above tips, reach out to your trusted Premier Cooperative consultant today!

 

Genny Speckman

Dairy Production Consultant
 

 

Recent Posts

Sep 01, 2025
Current headlines surrounding the fertilizer markets tend to focus on high prices and affordability issues, especially with falling commodity prices. Ratios comparing the bushels of corn needed to buy a ton of fertilizer have, in some cases, reached record levels. Multiple factors including supply, tariffs, geopolitical tensions, and other global events are influencing markets today. Together, these factors have led to volatility in the market and current high costs.
Sep 01, 2025
I hope everyone had the chance to enjoy Labor Day weekend with family and friends. As summer begins to wind down, and with the many fairs throughout the area coming to a close, I’d like to congratulate all the kids who participated this year. If you haven’t done so already, there’s still time to check out our website for details on how our members’ kids can earn cash for showing livestock at the fair. In addition to awarding thousands of dollars to participants each year, Premier is also proud to sponsor many of the trophies presented at some of the local fairs. In some cases, we also provide products and financial support to local 4H groups traveling to the state fair. Good luck to all of you as you wrap up another show season.
Aug 06, 2025

Getting started with diesel storage has never been easier. Our Diesel Tank Lease Program offers a simple, hassle-free solution for producers who need reliable fuel access without the upfront investment in equipment. The program includes a 1,000-gallon tank equipped with a pump, hose, nozzle, and filter, and delivery is provided at no additional cost. With a minimum usage of 3,000 gallons per year, it’s a great fit for operations looking to streamline fuel management.